Your trusted compressed air filtration expert
30 Years Dedicated to Compressed Air Filtration & Separation Technology. Serving Petrochemical, Power, Cement, Plastic, Laser Cutting & More
Home / All / Compressor Oil Separators / For Atlas Copco / Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180
Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180
Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180

Oil Separator Element 1621938599 — Direct for Atlas Copco GA132 / GA160 / GA180

Share
CategoriesFor Atlas Copco
BrandAIRPULL
Product Specifications1621938599
Element TypeAir-Oil Separator
BrandAIRPULL
Filter MediaUltra-fine glass fiber
Residual Oil Content≤ 3 ppm
Initial Pressure Drop0.15bar-0.25bar
Working Pressure0.2Mpa-1.3Mpa
Service Life≥4000 h (operating conditions dependent)
End CapsGalvanized Sheet Metal
Support CoreGalvanized Sheet Metal
Sealing GasketNBR / FKM
Minimum Order1 piece
HS Code8421.9990
FOB portshanghai
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T
Detail Information
AIRPULL Filtration — Manufacturer since 1996 · Xinxiang, Henan, China WhatsApp: +86 198 3621 2010
AIRPULL · Compatible Element

Oil Separator Element 1621938599 — for Atlas Copco GA132 / GA160 / GA180

A drop-in air-oil separator for Atlas Copco GA-series rotary screw compressors (132–180 kW). Built to the dimensional and performance specification of OEM part 1621938599, with glass fiber + imported support layers holding oil carryover to ≤ 3 ppm. Send us your model and serial number — we confirm fit before you order.

PART NUMBER 1621938599
1621938599 air-oil separator element, flange and pleated media view
Flange & pleated media
1621938599 separator element end cap detail
End cap & gasket seat
1621938599 separator element perforated support core
Perforated support core
1621938599 separator element overall dimension view
Overall build & dimensions

Actual AIRPULL production unit — photos of the element you receive.

Part Number1621938599
FitsGA132 / 160 / 180
Residual Oil≤ 3 ppm
Initial ΔP0.15–0.25 bar
Service Life≥ 4000 h
MOQ1 pc
01 · Can it be installed?

Not sure it fits? Check these three things first.

Oil separators that look identical can differ by a few millimetres — enough to leak, bypass or fail within weeks. Three checks, two minutes, and you'll know if this is your part.

01

Your compressor model

This element is built for the GA-series machines below. Look at the nameplate on the compressor canopy — not the dryer or the receiver.

02

Your current part number

Compare against the cross-reference list below. Old labels fade — the number is stamped on the element end cap or on your last invoice.

03

Three dimensions

Measure the old element: outer diameter, inner diameter, height. If all three match the table below, it fits.

Model cross-reference

CompressorPowerCross-Reference P/N
Atlas Copco GA132132 kW1621938599 · 1621938500
Atlas Copco GA160160 kW1621938599 · 1614905600
Atlas Copco GA180180 kW1621938599
GA132–180 series132–180 kW1621-9385-99 · 96 606 35 345

Critical dimensions

596 mm
23.5 in · OD
widest point, end cap to end cap
264 mm
10.4 in · ID
inside the open bore
350 mm
13.8 in · Height
end cap face to face, gasket excluded
~13 kg
Weight
approx., per element
Drop-in
Installation
cartridge inside separator vessel

Still not sure? Don't order on a guess.

Send us three photos and our engineers confirm the match and reply within 24 hours — with the drawing if you need it:

  • (1) The compressor nameplate
  • (2) The old element with any visible number
  • (3) A tape measure across the diameter and height
02 · When to change it

Is it actually time to change it?

Most buyers land on this page because something is already wrong. Here's how to tell whether the separator is the culprit — and what to do about it.

Differential pressure alarm / ΔP above 0.1 MPa — the element is loaded. Beyond roughly 0.08–0.1 MPa the compressor works harder and power consumption climbs measurably.→ Fit a new element; don't wait for the 4,000 h mark.
Oil consumption rising, topping up more often — separated oil isn't returning to the sump, or media has collapsed.→ Check the scavenge/return line first, then fit a new element.
Oil in the compressed air line / oily condensate — classic carryover. Contaminates pneumatic tools, ruins paint and laser cutting, clogs dryers.→ Fit a new element immediately; check downstream filters too.
Discharge temperature running high — a blocked separator raises back-pressure and can trip the high-temp shutdown.→ Fit a new element, and verify the cooler and oil level.
Operating hours ≥ 4,000 h — even without symptoms, glass fibre media degrades. In dusty or high-humidity sites, change it closer to 2,000 h.→ Schedule at the next planned stop.
Element discoloured, brittle or burnt-smelling — usually overheating or oil degradation, not just age.→ Fit a new element and investigate the oil condition.
Rule of thumb: on a continuously running GA132–GA180, budget one separator per ~4,000 operating hours per machine — closer to 2,000 h in dusty or high-humidity sites. If you run more than five machines, ask us about a scheduled supply plan so you never hold emergency stock.
03 · Technical specifications & materials

Technical Specifications

TypeAir-oil separator element
OEM Part No.1621938599
Filter mediaGlass fiber + imported support layers
Residual oil≤ 3 ppm
Filtration efficiency99.9% @ 1 micron
Initial pressure drop0.15–0.25 bar
Working pressure0.2–1.3 MPa
Working temperature−20 °C to +100 °C
Service life≥ 4000 h (operating conditions dependent)
End capsGalvanized steel / aluminum
Support corePerforated galvanized steel
GasketNBR standard / FKM-Viton for high-temp
HS code8421.9990
OriginXinxiang, Henan, China

What each layer actually does

Filter media (ultra-fine glass fibre, pleated)
Determines residual oil (≤3 ppm) and how fast ΔP climbs. Cheaper paper-blend media hits 3 ppm briefly, then rises fast.
End caps (galvanised steel / aluminium)
Holds shape under 1.3 MPa and repeated thermal cycling. Caps that deform = bypass = oil straight downstream.
Support core (perforated galvanised steel)
Stops media collapse at end-of-life. This is what prevents sudden failure instead of a gradual ΔP rise.
Sealing gasket (NBR / FKM)
NBR for standard mineral oil; specify FKM for synthetic oil or high-temperature duty.
Bonding (two-component adhesive, metered & cured)
Bond failure is the most common cause of premature separator failure. Ours is metered and oven-cured, not hand-applied.
04 · Why choose us

What you get beyond the part itself

In-house media, in-house production

Filter media, pleating, bonding, assembly and testing all happen in our own plant across 15 production lines. No outsourced media means no batch-to-batch surprises: the element you reorder in six months performs like the one you bought today.

Every batch tested, not sampled occasionally

Filtration efficiency, initial pressure drop, burst pressure, dust-holding capacity, seal integrity and bypass are verified on our own test benches at IQC, PQC and FQC stages.

Consistent fit, confirmed before shipping

Dimensional inspection on every batch. If it doesn't match the drawing, it doesn't leave the floor.

Lower cost per operating hour

The real cost of a separator isn't the purchase price. It's power consumed against ΔP, oil lost to carryover, and the downtime of an unplanned change-out.

Standard or made-to-drawing

Running an unusual machine or a non-standard housing? We build to your sample or drawing, including private-label branding and packaging.

30 years, 12,000+ SKUs, 50+ countries

Manufacturing compressor filtration since 1996. That cross-reference database is what lets us match an unfamiliar part number in hours, not weeks.

05 · OEM vs. AIRPULL

An honest comparison

OEM vs. AIRPULL — we'd rather you know exactly what you're buying.

ItemOEM referenceAIRPULL element
Dimensions & fitReference standardBuilt to match, dimensional inspection per batch
Residual oil≤ 3 ppm≤ 3 ppm
Service life≥ 4,000 h (operating conditions dependent)≥ 4,000 h (operating conditions dependent)
Lead timeOften weeks via local dealerStock ships in 2 days, production orders in 7 days
Minimum orderUsually 1 pc through dealer1 pc — order a single trial unit first
Warranty on your machine—Check your OEM service contract and local rules before fitting an aftermarket consumable
Our honest advice: if your machine is under an active service contract that requires OEM parts, or the failure would shut down a critical process with no redundancy, buy the OEM part. For everything else — routine maintenance, multi-machine plants, distributor stock — a verified compatible element saves real money with no measurable performance compromise. Try one first. That's why MOQ is 1.
06 · Ordering, lead time & terms

Business terms

Ordering & logistics

Minimum order: 1 piece — single trial units welcome.

Lead time: stock items ship in 2 working days; production orders in 7 days.

Sample: free sample for qualified industrial buyers — verify fit and performance before bulk order.

Packaging: individual PE bag + inner carton; export carton or palletised / wooden case for sea freight; neutral or your own branding available.

Payment & shipment

Distributor support: tiered supply programmes, distributor terms and protected territories available.

Payment: T/T, L/C at sight, Western Union.

Shipment: EXW / FOB / CIF / DAP to Shanghai / Ningbo / Qingdao; air courier for urgent single units.

Warranty: 12 months or 4,000 operating hours, whichever comes first; manufacturing defects covered free of charge.

Documentation: CO, packing list, test report, MSDS on request.

07 · Installation & cautions

Installation: 6 steps, and 4 mistakes that kill a new element

Installation sequence

  1. Stop the compressor, isolate power, fully depressurise the separator vessel; confirm zero pressure on the gauge.
  2. Drain the oil from the separator housing.
  3. Open the vessel, remove the old element, clean the seating surface and housing interior.
  4. Check the scavenge (oil return) line and orifice — a blocked return is the #1 cause of a new separator "failing" immediately.
  5. Fit the new element with a new gasket; seat it evenly, don't force it.
  6. Reassemble, torque to housing spec, refill oil, run and check for leaks; log the change date and hour-meter reading.

Four things that destroy a new separator

  • Reusing the old gasket.
  • Skipping the scavenge line check.
  • Over-tightening the housing bolts (distorts end caps and opens a bypass path).
  • Mixing oil types or topping up with a different grade (foaming floods the media).
08 · FAQ

Frequently asked questions

Is this a genuine Atlas Copco part?
No. It is an aftermarket element manufactured by AIRPULL to match the dimensional and performance specification of OEM part 1621938599. We are not affiliated with Atlas Copco; brand names and part numbers are used for compatibility identification only.
Compatibility notice: always confirm suitability against your compressor model and serial number before ordering.
Will using this element void my compressor warranty?
Rules on aftermarket consumables vary by market, and an active OEM service contract may specify genuine parts. Check your service agreement and local regulations before fitting a compatible element; we can supply the documentation your service provider asks for.
How do I know it will fit my machine?
Compare three things — compressor model, current part number, and the OD / ID / height in the tables above. If you send us the nameplate and a photo of the old element, we confirm the match and reply within 24 hours, before you pay anything.
What service life should I expect?
≥ 4,000 operating hours, dependent on operating conditions; shorter in dusty, humid or high-ambient-temperature sites. The reliable trigger is differential pressure, not the calendar — change the element when ΔP approaches 0.1 MPa.
Can I order just one piece to test?
Yes, MOQ is 1 piece. We would rather you test one and come back than commit to a pallet you haven't validated.
NBR or FKM gasket?
NBR is standard for mineral compressor oil and normal temperatures. Specify FKM (Viton) for synthetic oil, elevated temperatures or aggressive oil chemistry. Tell us your oil type when ordering.
Why is my new separator still passing oil?
In most cases it is not the element. Check the scavenge/return line and orifice for blockage, verify oil level and grade, and confirm the housing bolts are torqued evenly. If all three are fine, contact us with photos and we will diagnose it.
Can you make this to my drawing or sample?
Yes — OEM/ODM production from your drawing or sample, including private-label branding and packaging, with rapid prototyping and small-batch trial runs.
How fast can you ship?
Stock items ship within 2 working days; production orders in 7 days. Single urgent units can go by air courier.
Do you supply the other filters for the same machine?
Yes — air filter, oil filter and lubricant for the same GA132–GA180 platform. Ordering the full service kit saves freight and keeps all three on the same change interval.
10 · Request a quote

Send us four details, get a factory-direct answer

Compressor brand & model · part number · quantity · destination country or port. Our engineers confirm fit before you order, and reply within 24 hours.

WhatsApp: +86 198 3621 2010
AIRPULL Filtration · Xinxiang, Henan, China
Compatibility & trademark notice

AIRPULL compatible elements are aftermarket components manufactured to meet or exceed the dimensional and performance specifications of the referenced original parts. All part numbers and drawings are shown for cross-reference and compatibility identification only. AIRPULL is not affiliated with any original equipment manufacturer. Brand names, trademarks and part numbers shown on this page are the property of their respective owners. Before ordering, always confirm suitability against your compressor model and serial number.

© 1996–2026 AIRPULL. All compatible-part trademarks are property of their owners.

Review
  • 加载中···

Please send your message to us

*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
30 Years Dedicated to Compressed Air Filtration & Separation Technology. Serving Petrochemical, Power, Cement, Plastic, Laser Cutting & More
Contact Person
Jeff Zhang
Full Name:
Jeff Zhang
Tel:

+86 19836212010

Email:
sales@airpulltech.com
WhatsApp:
8619836212010
Address:
No. 1506, Xinqi Street, National Chemical and Physical Power Sources Industrial Park, Muye District, Xinxiang City, Henan Province (1000 meters north of the intersection of Beihuan Road and Xinqi Stre

Please send your message to us

*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Your trusted compressed air filtration expert