




AIRPULL Self-Cleaning Air Filter Manufacturer | Industrial Dust Collection System
| Share | |
|---|---|
| Categories | Industrial Dust Collectors |
| Brand | AIRPULL |
| Filtration Accuracy | 1 micron / 99.99% |
| Filter Media | Pleated filter paper cartridge |
| Operation | Fully automatic self-cleaning |
| Cleaning Method | Pulse reverse-blowing (PLC) |
| Dust Collection | Dry type |
| Capacity Range | 80-2000 m3/min |
| Filter Area Range | 108-2700 m2 |
| Certifications | CE / ISO 9001 / ISO 14001 |
| MOQ | 1 set |
| Lead Time | <= 15 working days |
| HS Code | 8421.2990 |
| Brand | AIRPULL |
| Customization | Non-standard / made to order |
| Controller | PLC (Domestic / Siemens optional) |
| FOB port | shanghai |
| Terms of Payment | L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal |
Self-Cleaning Air Filter
Automatic ash cleaning for long-term, continuous air purification at the air compressor inlet.
Self-cleaning air filter is a new type of air filter with automatic ash cleaning function, which can carry out long-term and continuous air purification, filter the impurities such as dust contained in the gas, and clean gas enters the equipment.
Working Principle
Continuous filtration with automatic pulse backblowing
The outlet of the clean air chamber of the self-cleaning air filter is connected with the entrance of the air compressor. Under the action of negative pressure, small particles are adsorbed on the surface of the filter cartridge through the Brownian motion, diffusion and electrostatic effect. Large particles are intercepted on the surface of the filter cartridge through inertial collision and screening effect, forming a layer of dust cake. The pressure difference signal is sent to PLC through the pressure sampling port, the pulse valve is energized and opened, and the high pressure air is blown back through the spray pipe to blow off the dust on the surface of the filter cartridge, and the self-cleaning equipment returns to normal working state.
Product Characteristics
Built for uninterrupted compressor operation
- Automatic backblowing cleaning dust, can be controlled by the pressure difference or time cleaning filter, by the PLC according to the set sequence of backblowing (backblowing time is 0.1-0.2 seconds), can ensure that the air compressor continuous 2 years uninterrupted work.
- The front filter prevents large pollutants such as catkins and leaves from entering the equipment and extends the service life of the filter cartridge.
- Filter material selection of wood pulp fiber or polyester material, with low resistance, high precision, waterproof oil, anti-static and other characteristics.
- Application fields: chemical, steel, metallurgy, automobile, food, electronics and other industries.
- Electric control module, easy to install, just connect the power supply and turn on the air to use.
- Low resistance, with an initial resistance below 150 Pa.
- Support non-standard customization.
Applications
Where the self-cleaning air filter works
Technical Specifications
SELF-CLEANING AIR FILTER (80-2000m³/min)
Capacity Range
| Filter Rated Capacity | 80 | 120 | 180 | 240 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Supporting Compressor Intake Capacity | 40 | 60 | 90 | 120 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 |
Operating Parameters
| Filtration Accuracy | 1μm/99.99% |
|---|---|
| Relative Humidity | 80%, Short term (e.g. rainy season, fog)<100% |
| Operating Ambient Temperature | < 100℃ |
| Initial Resistance of Filter | 150pa |
| Running Resistance | 400-650pa |
| Alarm Resistance | Small equipment 1000pa, Large equipment 1200pa |
| Final Resistance | 1500Pa(Configurable) |
| Self-cleaning Air Consumption by Reverse Blowing | 0.2-0.3m³/min |
| Blowback Self-cleaning Air Pressure | 0.4~0.6MPa |
| Voltage, Power Consumption | Voltage AC220V, Power consumption 100-150W |
| Seismic Grade Strength | Grade 3 or above |
| Self-cleaning Method | 1. Timing, 2. Differential pressure control, 3. Manual control |
| Controller (Optional) | 1. Standard (Touch screen), 2. High-end (Touch screen), 3. High-end (IOT screen) |
| PLC (Optional) | 1. Domestic PLC, 2. Siemens PLC |
Model Selection Matrix
| Number of Cartridge | 4 | 6 | 9 | 12 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Filter Area | 108 | 162 | 243 | 324 | 405 | 540 | 675 | 810 | 945 | 1080 | 1215 | 1350 | 1485 | 1620 | 1755 | 1890 | 2025 | 2160 | 2295 | 2430 | 2565 | 2700 |
| Filter Cylinder Layout Structure | 2Lx2W | 2Lx3W | 3Lx3W | 3Lx4W | 3Lx5W | 4Lx5W | 5Lx5W | 6Lx5W | 7Lx5W | 8Lx5W | 9Lx5W | 10Lx5W | 11Lx5W | 12Lx5W | 13Lx5W | 14Lx5W | 15Lx5W | 16Lx5W | 17Lx5W | 18Lx5W | 19Lx5W | 20Lx5W |
| Outlet Pipe Diameter | DN200 | DN250 | DN300 | DN350 | DN400 | DN450 | DN500 | DN500 | DN600 | DN600 | DN700 | DN700 | DN800(Reverse circle) | DN800(Reverse circle) | DN800(Reverse circle) | DN900(Reverse circle) | DN900(Reverse circle) | DN1000(Reverse circle) | DN1000(Reverse circle) | DN1100(Reverse circle) | DN1100(Reverse circle) | DN1200(Reverse circle) |
| Weight (Net Weight) t | 0.6 | 0.7 | 0.8 | 1 | 1.1 | 1.3 | 1.5 | 1.7 | 1.9 | 2.1 | 2.3 | 2.5 | 2.7 | 2.9 | 3.1 | 3.3 | 3.5 | 3.7 | 3.9 | 4.1 | 4.3 | 4.5 |
Request a Quote
Tell us about your compressor intake conditions
Share your required capacity and operating environment. The AIRPULL team can support model selection, sizing and non-standard customization.
- Support non-standard customization.
- Electric control module, easy to install, just connect the power supply and turn on the air to use.
- Low resistance, with an initial resistance below 150 Pa.

Contact AIRPULL for model selection, quotation and non-standard customization of your self-cleaning air filter.
- 加载中···
Please send your message to us
- Phone
- *Title
- *Content

- Full Name:
- Jeff Zhang
- Tel:
+86 19836212010
- Email:
- sales@airpulltech.com
- WhatsApp:
- 8619836212010
- Address:
- No. 1506, Xinqi Street, National Chemical and Physical Power Sources Industrial Park, Muye District, Xinxiang City, Henan Province (1000 meters north of the intersection of Beihuan Road and Xinqi Stre
Please send your message to us
- Phone
- *Title
- *Content


































