




Vacuum Pre-Filter for Vacuum Pumps
Vacuum Pre-Filter
Protect the pump rotor before dust and liquid ever reach it.
Installed at the inlet of a vacuum pump, this pre-filter removes solid dust and small amounts of entrained liquid from the process gas, keeping the moving parts of the pump free from wear and corrosion.
Clean gas in. Longer pump life out.
The vacuum pre-filter is mounted at the front of the vacuum pump inlet. It filters dust and a small amount of liquid carried in the gas, protecting the pump rotor against damage.
While the pump is running, solid dust is intercepted on the surface of the filter media. A small amount of liquid is filtered out, coalesces and sinks to the bottom of the housing, then leaves through the liquid discharge line. Clean gas continues into the vacuum pump, preventing wear and corrosion of the moving pair.
The result is a stable suction line, less contamination inside the pump and a longer service life for the equipment downstream.
Rotor protection
Dust and entrained liquid are stopped before they can reach the pump's moving parts.
Liquid separation and drain
Coalesced liquid collects at the bottom of the housing and is discharged through the drain line.
Extended service intervals
Clean gas entering the pump helps safeguard its service life and reduces unplanned maintenance.
How the filter works
The filter operates in a negative pressure state. As dust-laden gas passes through the media, coarse and fine particles are separated in two different ways.
Negative-pressure operation
The unit is installed on the suction side and works under vacuum conditions, with a sealed housing that holds pressure without leakage.
Gravity settling of coarse particles
When the dust-containing gas passes through the filter material, larger particles are filtered to the bottom of the container under gravity.
Fine particle capture
Small particles are adsorbed onto the surface of the fibre through Brownian movement and diffusion, so clean gas enters the vacuum pump and its service life is maintained.
Engineered for the suction line
Operating limits, sealing performance and filter media efficiency as specified in the AIRPULL catalogue.
Wide operating range
Operating temperature -26 °C to 104 °C, covering both cold-start and warm process conditions.
Vacuum service
Designed for use under vacuum above -100 kPa, on the inlet side of the pump.
Leak-free sealing
Positive pressure test at 0.5 bar with no leakage during the pressure hold.
Filter element accuracy
Polyester 99% @ 5 µm and paper 99% @ 2 µm elements are available.
Configured for your pump
Housing material, installation orientation and connections can be matched to the vacuum equipment and process conditions.
Type selection
Options listed in the AIRPULL catalogue.
Material
Stainless steel or epoxy treatment, etc.
Installation mode
Vertical or horizontal
Interface
Supports customization
Dimensions
| Flange Inlet / Outlet | Flow Rate m³/h | A / mm | B / mm | H0 / mm | H1 / mm |
|---|---|---|---|---|---|
| DN80 | 885 | 356 | 299 | 689 | 470 |
| DN80 | 885 | 356 | 299 | 689 | 470 |
| DN100 | 885 | 356 | 299 | 689 | 470 |
| DN100 | 885 | 356 | 299 | 689 | 470 |
| DN125 | 1360 | 470 | 279 | 714 | 495 |
| DN125 | 1360 | 470 | 279 | 724 | 495 |
| DN150 | 1870 | 470 | 305 | 704 | 521 |
| DN150 | 1870 | 470 | 305 | 704 | 521 |
| DN200 | 3060 | 572 | 356 | 965 | 648 |
| DN250 | 4930 | 686 | 410 | 1130 | 864 |
| DN300 | 7990 | 686 | 410 | 1130 | 864 |
| DN250 | 4930 | 672 | 406 | 1461 | 1143 |
| DN300 | 8415 | 672 | 406 | 1461 | 1143 |
| DN300 | 8415 | 672 | 406 | 1765 | 1448 |
Request a quote
Send your flow rate, connection size and service conditions and our team will configure the right vacuum pre-filter for your pump.
Request a quote© 2026 AIRPULL. Technical data from the AIRPULL vacuum pre-filter catalogue.
- 加载中···
Please send your message to us
- Phone
- *Title
- *Content

- Full Name:
- Jeff Zhang
- Tel:
+86 19836212010
- Email:
- sales@airpulltech.com
- WhatsApp:
- 8619836212010
- Address:
- No. 1506, Xinqi Street, National Chemical and Physical Power Sources Industrial Park, Muye District, Xinxiang City, Henan Province (1000 meters north of the intersection of Beihuan Road and Xinqi Stre
Please send your message to us
- Phone
- *Title
- *Content



































