
Sealed 20 L pail for workshop top-up and single-machine service.




| Share | |
|---|---|
| Categories | For Atlas Copco |
| Brand | AIRPULL |
| Product Specifications | ACPL-216 |
| Base Oil Type | Group II hydrotreated base oil |
| Viscosity Grade | ISO VG 46 (46.38 cSt @ 40 °C) |
| Viscosity Index | 103 |
| Flash Point | 229 °C (open cup) |
| Pour Point | -30 °C |
| Density @15 °C | 0.86 g/cm³ |
| Product Type | Compressor lubricating oil |
| Colour | Clear to pale yellow |
| Application | Screw air compressor |
| Service Period | 4,000 h |
| Applicable Temperature | 85-95 °C |
| Oil Change Cycle | 3,000 h below 95 °C |
| Certification | ISO 6743-3A-DA |
| Packaging | 20 L plastic pail / 200 L metal drum |
| Shelf Life | Approx. 60 months |
| FOB port | shanghai |
| Terms of Payment | L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal |
AIRPULL · ISO 6743-3A-DA
ACPL-216 is a Group II hydrotreated screw compressor oil built for continuous duty in rotary screw air compressors. It reaches a 4,000 h service period at 85–95 °C, carries a viscosity index of 103 and a viscosity of 46.38 mm²/s at 40 °C, and is supplied in a 20 L plastic pail or a 200 L metal drum.
ACPL-216 is built on a Group II hydrotreated base oil combined with a high-performance composite additive package. It offers excellent thermal and oxidation stability, a low carbon residue rate, and good anti-rust, anti-corrosion and water separation performance, making it a dependable lubricant for continuous screw air compressor operation.
Excellent resistance to thermal breakdown and oxidation keeps the oil film intact through long, hot running cycles.
A low carbon residue rate limits varnish and coke build-up on the airend, separator and oil lines.
Good anti-rust and anti-corrosion protection with clean water separation, so condensate drains out instead of emulsifying.
A 4,000 h service period in normal screw compressor duty reduces oil changes and downtime.
Stable viscosity and film strength across the 85–95 °C range typical of air-cooled rotary screw units.
Below 95 °C the recommended oil change interval is 3,000 h.
Typical properties of ACPL-216. Values are typical data for the grade and are not a specification limit for every batch.
| Item | Unit | Specification | Typical data | Test method |
|---|---|---|---|---|
| Appearance | – | Clear to pale yellow | Pale yellow | Visual |
| Color | – | | L0.5 | ASTM D1500 | |
| Kinematic viscosity @40 °C | mm²/s | 41.4–50.6 | 46.38 | ASTM D445 |
| Kinematic viscosity @100 °C | mm²/s | Measured value | 6.93 | ASTM D445 |
| Density @15 °C | g/cm³ | 0.85–0.87 | 0.86 | ASTM D4052 |
| Viscosity index | – | 100 | 103 | ASTM D2270 |
| Flash point (open cup) | °C | >210 | 229 | ASTM D92 |
| Pour point | °C | <−22 | −30 | ASTM D97 |
| Acid value | – | <0.3 | 0.15 | ASTM D974 |
| Foaming characteristics (24 °C, 93.5 °C, 24 °C) | ml/ml | <50/0 | 5/0, 5/0, 5/0 | ASTM D892 |
| Demulsibility (40-37-3) @54 °C | min | <30 | 12 | ASTM D1401 |
| Rust test | – | Pass | – | – |
The oil change intervals listed here are guideline values based on practical experience. They depend on the intended use of the air compressor and the technical conditions of the application.

Sealed 20 L pail for workshop top-up and single-machine service.

200 L metal drum for planned maintenance and multi-compressor fleets.
ACPL-216 meets the ISO 6743-3A-DA standard.
ISO 6743-3A-DAHealth and safety guidance is provided in the corresponding Material Safety Data Sheet (MSDS), which is available from your Airpull sales representative.
Used oil must be delivered to a designated collection point. It must not be discharged directly into sewers, soil or water.
Under original, sealed, dry and frost-free conditions, the shelf life is approximately 60 months.
Avoid prolonged or repeated skin contact. If ingested, medical treatment is required. Protect the environment and dispose of the product, waste oil and containers in accordance with legal regulations.
Send your compressor model, sump capacity and the number of units to be serviced, and our team will come back with pricing, the MSDS and the technical data sheet.
Send inquiry
+86 19836212010