Your trusted compressed air filtration expert
30 Years Dedicated to Compressed Air Filtration & Separation Technology. Serving Petrochemical, Power, Cement, Plastic, Laser Cutting & More
Home / All / Compressor Oil & Lubricants / For Atlas Copco / Compressor Lubricating Oil Manufacturer Supplier ACPL-316S
Compressor Lubricating Oil Manufacturer Supplier ACPL-316S
Compressor Lubricating Oil Manufacturer Supplier ACPL-316SCompressor Lubricating Oil Manufacturer Supplier ACPL-316SCompressor Lubricating Oil Manufacturer Supplier ACPL-316SCompressor Lubricating Oil Manufacturer Supplier ACPL-316S

Compressor Lubricating Oil Manufacturer Supplier ACPL-316S

Share
CategoriesFor Atlas Copco
BrandAIRPULL
Product SpecificationsACPL-316S
Base Oil TypeGTL (gas-to-liquid) base oil
Viscosity Grade46
Kinematic Viscosity @40 C45.8 mm2/s
Kinematic Viscosity @100 C7.56 mm2/s
Viscosity Index107
Density @25 C0.854 kg/L
Flash Point232 C (open cup)
Pour Point-30 C
Total Acid Number0.09 mg KOH/g
Service Period5,000-7,000 h (7,000 h standard duty)
Applicable Temperature85-95 C
Oil Change Cycle5,000 h below 95 C
CertificationISO 6743-3A-DAJ
Packaging18 L plastic pail / 200 L metal drum
Shelf LifeApprox. 60 months
Detail Information

AIRPULL · ISO 6743-3A-DAJ

ACPL-316S screw air compressor lubricating oil

ACPL-316S is a GTL (gas-to-liquid, natural gas-derived) base oil screw compressor fluid built for continuous duty in rotary screw air compressors. It reaches a 5,000–7,000 h service period, with 7,000 h in standard duty, at 85–95 °C, carries a viscosity index of 107 and a kinematic viscosity of 45.8 mm²/s at 40 °C, and is supplied in an 18 L plastic pail or a 200 L metal drum.

  • 5,000–7,000H Service period, 7,000 h in standard duty
  • 85–95°C Operating temperature
  • 5,000H Oil change interval below 95 °C
  • 60months Shelf life, sealed and frost-free
ACPL-316S screw air compressor fluid in an 18 L plastic pail and a 200 L metal drum
ACPL-316S · 18 L pail and 200 L drum

Formulated for screw air compressors

ACPL-316S is built on a GTL (gas-to-liquid, natural gas-derived) base oil combined with a high-performance composite additive package. It offers excellent thermal and oxidation stability, a low carbon residue rate, and good anti-rust, anti-wear and water separation performance, making it a dependable lubricant for continuous screw air compressor operation.

GTL (gas-to-liquid) base oil + High-performance composite additives

Performance advantages

  • Thermal & oxidation stability

    Excellent resistance to thermal breakdown and oxidation keeps the oil film intact through long, hot running cycles.

  • Low carbon residue rate

    A low carbon residue rate limits varnish and coke build-up on the airend, separator and oil lines.

  • Anti-rust, anti-wear, water separation

    Good anti-rust and anti-wear protection with clean water separation, so condensate drains out instead of emulsifying.

  • 5,000–7,000 H service period

    A 5,000–7,000 h service period, with 7,000 h in standard duty, reduces oil changes and downtime.

  • 85–95 °C operating temperature

    Stable viscosity and film strength across the 85–95 °C range typical of air-cooled rotary screw units.

  • 5,000 H oil change interval

    Below 95 °C the recommended oil change interval is 5,000 h.

Typical data

Typical properties of ACPL-316S. Values are typical data for the grade and are not a specification limit for every batch.

Item Unit Specification Typical data Test method
Appearance–Colorless to pale yellowPale yellowVisual
Viscosity––46–
Density25 °C, kg/L–0.854–
Kinematic viscosity @40 °Cmm²/s41.4–50.645.8ASTM D445
Kinematic viscosity @100 °Cmm²/sMeasured value7.56ASTM D445
Viscosity index–100107ASTM D2270
Flash point (open cup)°C>220232ASTM D92
Pour point°C<−21−30ASTM D97
Foaming characteristicsml/ml<50/00/0, 0/0, 0/0ASTM D892
Total acid numbermg KOH/g–0.09–
Demulsibility (40-37-3) @54 °Cmin<309ASTM D1401
Rotating bomb oxidation stabilitymin–2100T0193

The oil change intervals listed here are guideline values based on practical experience. They depend on the intended use of the air compressor and the technical conditions of the application.

Packaging specifications

ACPL-316S 18 L plastic pail
18L Plastic pail

Sealed 18 L pail for workshop top-up and single-machine service.

ACPL-316S 200 L metal drum
200L Metal drum

200 L metal drum for planned maintenance and multi-compressor fleets.

Standards, safety & environment

  • Technical standard

    ACPL-316S meets the ISO 6743-3A-DAJ standard.

    ISO 6743-3A-DAJ
  • Safety & health

    Health and safety guidance is provided in the corresponding Material Safety Data Sheet (MSDS), which is available from your Airpull sales representative.

  • Environmental protection

    Used oil must be delivered to a designated collection point. It must not be discharged directly into sewers, soil or water.

Shelf life

Under original, sealed, dry and frost-free conditions, the shelf life is approximately 60 months.

Precautions

Avoid prolonged or repeated skin contact. If ingested, medical treatment is required. Protect the environment and dispose of the product, waste oil and containers in accordance with legal regulations.

Ask for ACPL-316S pricing and availability

Send your compressor model, sump capacity and the number of units to be serviced, and our team will come back with pricing, the MSDS and the technical data sheet.

Send inquiry

Review
  • 加载中···

Please send your message to us

*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
30 Years Dedicated to Compressed Air Filtration & Separation Technology. Serving Petrochemical, Power, Cement, Plastic, Laser Cutting & More
Contact Person
Jeff Zhang
Full Name:
Jeff Zhang
Tel:

+86 19836212010

Email:
sales@airpulltech.com
WhatsApp:
8619836212010
Address:
No. 1506, Xinqi Street, National Chemical and Physical Power Sources Industrial Park, Muye District, Xinxiang City, Henan Province (1000 meters north of the intersection of Beihuan Road and Xinqi Stre

Please send your message to us

*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Your trusted compressed air filtration expert