
Sealed 20 L pail for workshop top-up and single-machine service.






| Share | |
|---|---|
| Categories | For Atlas Copco |
| Brand | AIRPULL |
| Product Specifications | ACPL-416 |
| Base Oil Type | PAO (poly-alpha-olefin) |
| Viscosity Grade | 46 |
| Kinematic Viscosity @40 C | 43.9 mm2/s |
| Kinematic Viscosity @100 C | 7.5 mm2/s |
| Viscosity Index | 106 |
| Density @25 C | 0.865 kg/L |
| Flash Point | 268 C (open cup) |
| Pour Point | -57 C |
| Total Acid Number | 0.08 mg KOH/g |
| Service Period | 8,000-12,000 h |
| Applicable Temperature | 85-105 C |
| Oil Change Cycle | 8,000 h below 95 C |
| Certification | ISO 6743-3A-DAJ |
| Packaging | 20 L plastic pail / 208 L metal drum |
| Shelf Life | Approx. 60 months |
AIRPULL · ISO 6743-3A-DAJ
ACPL-416 is a PAO (poly-alpha-olefin) synthetic screw compressor fluid built for rotary screw air compressors running between 85 °C and 105 °C. It reaches an 8,000–12,000 h service period, with an 8,000 h oil change interval below 95 °C, has a viscosity index of 106 and a kinematic viscosity of 43.9 mm²/s at 40 °C, and is supplied in a 20 L plastic pail or a 208 L metal drum.
ACPL-416 combines a PAO base oil made from high-quality alpha-olefins with a high-performance composite additive package. The PAO base delivers a high viscosity index, very low volatility and a low pour point, while the additive package contributes oxidation and thermal stability, lubricity and metal protection, making the oil suited to continuous duty in rotary screw air compressors.
Excellent oxidation and thermal stability extend the service life of the compressor system and hold the oil film through hot running cycles.
Very low volatility limits oil carry-over and evaporation loss, which lowers maintenance cost and reduces top-up frequency.
Strong lubricity reduces friction in the airend, improving efficiency and lowering operating cost.
A long service period of 8,000–12,000 h cuts the number of oil changes and the downtime that comes with them.
Stable viscosity and film strength across the 85–105 °C range typical of air-cooled rotary screw units.
Below 95 °C the recommended oil change interval is 8,000 h.
Typical properties of ACPL-416. Values are typical data for the grade and are not a specification limit for every batch.
| Item | Unit | Specification | Typical data | Test method |
|---|---|---|---|---|
| Appearance | – | Colorless to pale yellow | Pale yellow | Visual |
| Viscosity | – | – | 46 | – |
| Density | 25 °C, kg/L | – | 0.865 | – |
| Kinematic viscosity @40 °C | mm²/s | 41.4–50.6 | 43.9 | ASTM D445 |
| Kinematic viscosity @100 °C | mm²/s | Measured value | 7.5 | ASTM D445 |
| Viscosity index | – | 100 | 106 | ASTM D2270 |
| Flash point (open cup) | °C | >220 | 268 | ASTM D92 |
| Pour point | °C | <−33 | −57 | ASTM D97 |
| Total acid number | mg KOH/g | – | 0.08 | – |
| Rust test | – | Pass | Pass | – |
The oil change intervals listed here are guideline values based on practical experience. They depend on the intended use of the air compressor and the technical conditions of the application.

Sealed 20 L pail for workshop top-up and single-machine service.

208 L metal drum for planned maintenance and multi-compressor fleets.
ACPL-416 meets the ISO 6743-3A-DAJ standard.
ISO 6743-3A-DAJHealth and safety guidance is provided in the corresponding Material Safety Data Sheet (MSDS), which is available from your Airpull sales representative.
Used oil must be delivered to a designated collection point. It must not be discharged directly into sewers, soil or water.
Under original, sealed, dry and frost-free conditions, the shelf life is approximately 60 months.
Avoid prolonged or repeated skin contact. If ingested, medical treatment is required. Protect the environment and dispose of the product, waste oil and containers in accordance with legal regulations.
Send your compressor model, sump capacity and the number of units to be serviced, and our team will come back with pricing, the MSDS and the technical data sheet.
Send inquiry
+86 19836212010